• Deutsch - www.arno.de
  • English(uk) - www.arno-tools.co.uk
  • English(US) - www.arnousa.com
  • English(SG) - www.arno.com.sg
  • Russian(RU) - www.arnoru.ru
  • Italia(IT) - www.arno-italia.it
Arrow
We have a passion for precision.
You are here:   »   Products   »   Drilling   »   SHARK-Drill

SHARK-Drill

ARNO SHARK-Drill®

General information

All holders with coolant through 

Nickel plated drill body

Smooth swarf chambers
for better chip flow

Spiral or straight flute available

Torx® - Screws
for easy and secure locking


Tool selection

Drilling depth from 1xD to 32xD
ø9,5mm up to ø114mm


Grades

Coated

AK10 TiAlN
PVD-Multilayer coating, Substrate K10 + TiAlN

Designed with a special geometry for drilling grey cast iron. Extended corner clips and stronger main cutting edge combined with the TiAIN coating offers maximum tool life in this material. Use in strong and stable cutting environment.

AK20 TiAlN
PVD-
Multilayer coating, Substrate K20 + TiAlN
K20 carbide grade with higher toughness as AK10 for machining all cast iron materials, non-ferrous metals, titanium and titanium alloys. Under best conditions up to 3xD in steel materials. Only for use in a stable cutting environment up to 5-7xD.

AP40 TiAlN
PVD-
Multilayer coating, Substrate P40 + TiAlN
P40 carbide grade for machining steel and with limitations also stainless steel. It is our toughest carbide grade. Only use in a stable cutting environment up to 5-7xD.

HSS TiN
PVD-
Multilayer coating, HSS + TiAlN
HSS without Co content, our toughest grade. The TiN coating makes it easier to recognize wear. The best grade for poor machining conditions.

HSS TiAlN
PVD-
Multilayer coating, HSS + TiAlN
HSS without Co content, our toughest grade. Due to PVD multilayer coating an improved wear and temperature resistance is achieved. The best grade for poor machine conditions.

HSS5 TiAlN
PVD-
Multilayer coating, HSS5 + TiAlN
HSS with 5% cobalt content, stock item from 9.5mm - 114mm. Often the most universal grade. Excellent combination of toughness and wear resistance.

HSS8 TiAlN
PVD-
Multilayer coating, HSS8 + TiAlN
HSS with 8% cobalt content. Because of the high wear resistance, this grade offers the best tool life of all HSS grades, especially under stable machining conditions. Stock item from 9.5mm - 35mm.

HSS8 TiCN
PVD-
Multilayer coating, HSS8 + TiCN
HSS with 8% cobalt content, stock item from 9.5mm - 35mm. TiCN coating has less tendency for "build up edge" in non-ferrous metals. Good results in hardened and tempered steels also for deeper drilling depths.

Uncoated

AK20
K20 carbide grade with higher toughness than AK10. Grade for machining all cast iron materials, non-ferrous metals, titanium and titanium alloys. Less tendency for build-up edge in non-ferrous metals. Use only in stable cutting environments.

SHARK-Drill

SHARK-Drill

SHARK-Drill

AS Geometrie

We are here for you!

Phone:

+44 01785 850 072

Fax:

+44 01785 850 076

Mail:

sales(at)arno.de

ARNO (UK) Limited
Unit 9, 10 & 11, Sugnall Business Centre
Sugnall, Eccleshall
ST21 6NF Staffordshire
Phone +44 01785 850 072
Fax +44 01785 850 076
E-Mail sales(at)arno.de
Web www.arno-tools.co.uk

 

© 2016 Karl-Heinz Arnold GmbH