• Deutsch - www.arno.de
  • English(uk) - www.arno-tools.co.uk
  • English(US) - www.arnousa.com
  • English(SG) - www.arno.com.sg
  • Russian(RU) - www.arnoru.ru
  • Italia(IT) - www.arno-italia.it
Arrow
We have a passion for precision.
You are here:   »   Products   »   Grooving   »   SA - Parting off

SA - Parting off

General information

The cost effective solution for radial grooving as well as parting off up to 140mm in diameter. The monoblock holder "SA" is being used with the double sided inserts SA16, SA17, SA24, SA35 and SA40 in 1.5mm - 10mm widths.

Get to know the special ARNO-ACS cooling system® for SA - parting off.The Special coolant System ensures the flow is directed under the swarf and thereby improves tool life considerably. Through a second coolant jet additional coolant gets right on the tool flank. 


Details

 


Chipbreaker

F1:

  • Very soft cutting geometry with low cutting forces
  • For low to medium strength materials
  • Low build-up edge tendency
  • Suitable for thin walled components

T1:

  • Excellent swarf control and chip formation
  • For steel and stainless steel
  • Universal geometry
  • Suitable for thin walled components

S1:

  • Soft cutting geometry
  • Especially developed for stainless steel
  • Problem solver for steel machining

M1:

  • Geometry with small negative chamfer
  • For medium to high strength materials
  • Universal grade for steel (also for stainless steel and cast materials)
  • First choice where cutting conditions are solid

ALU:

  • Geometry with a sharp edge
  • First choice for Aluminium and non-ferrous materials
  • Perophery ground insert
  • High positive design
  • Polished chip breakers

Grades

AM5040 PVD coated carbide grade
Fine grain carbide + TIALN
A tough but universal grade for low to medium cutting speeds. The main
application area is stainless steel.

AP5020 PVD coated carbide grade
Fine grain carbide + TIALN
A universal grade for low to medium cutting speed. Main application areas are steel and stainless steel, but also suitable for parting off high temperature alloys and non ferrous materials.

AP2220 CVD coated carbide grade
Fine grain carbide + multilayer coating
Grade with excellent combination of wear resistance and cutting edge stability. Main application area are alloyed steel and cast materials, under stable conditions also suitable for stainless steel at medium to high cutting speeds.

AP5030 PVD coated carbide grade
Fine grain carbide + TIALN
A universal grade mainly for steel applications. The slightly tougher substrate (ISO P30-P35) makes it also suitable for stainless steel.

 

 

SA part-off holder

SA part-off module

SA part-off blade

Application video

We are here for you!

Phone:

+44 01785 850 072

Fax:

+44 01785 850 076

Mail:

sales(at)arno.de

ARNO (UK) Limited
Unit 9, 10 & 11, Sugnall Business Centre
Sugnall, Eccleshall
ST21 6NF Staffordshire
Phone +44 01785 850 072
Fax +44 01785 850 076
E-Mail sales(at)arno.de
Web www.arno-tools.co.uk

 

© 2016 Karl-Heinz Arnold GmbH